Latest Products http://www.paryoglifting.in Latest Products 17-06-02 en-us http://www.paryoglifting.in Single Girder EOT Crane http://www.paryoglifting.in/single-girder-eot-crane.htm Mon, 29 May 2017 00:00:00 +0530 We have established ourselves as a noted Manufacturer, Exporter and Supplier of Single Girder EOT Crane in India.  It has a capacity of up to 15 ton. Maintenance platform for L.T Drive is provided with the Single Girder EOT Crane and for the cross travel will be provided on customer demand. Double Girder EOT Crane http://www.paryoglifting.in/double-girder-eot-crane.htm Mon, 29 May 2017 00:00:00 +0530 We are one of the best Manufacturers, Exporters and Suppliers of Double Girder EOT Crane in India. The girder Construction of Double Girder EOT Crane is I-beam, Fabricated I-beam, and Sq. Box Type. It has a capacity up to 300 ton. Goliath Crane http://www.paryoglifting.in/goliath-crane.htm Mon, 29 May 2017 00:00:00 +0530 We are manufacturing, exporting and supplying Goliath Crane - off track type. Goliath Crane has a capacity up to 7.5 ton. It follows different crane mechanisms - m1, m2, m3, m4, m5, m6, m7, m8, and m9. Gantry Crane http://www.paryoglifting.in/gantry-crane.htm Mon, 29 May 2017 00:00:00 +0530 We are a noted Manufacturer, Exporter and Supplier of Gantry Crane in India. This Gantry Crane is sold by a brand name called PARYOG. The capacity for Gantry Crane is nearly up to 200 tons. Electric Winch http://www.paryoglifting.in/electric-winch.htm Mon, 29 May 2017 00:00:00 +0530 We are designated with a position of trustworthy suppliers involved in dealing with Electric Winch and offering the best deals. Buyers will not regret purchasing our products, as they conform to industrial quality management standards. Hot Cranes http://www.paryoglifting.in/hot-cranes.htm Mon, 29 May 2017 00:00:00 +0530 We make sure that the offered lot complies with the stated quality norms, thus check the product quality on several stages. Capitalizing on an efficient industrial network, our organization has made coalitions with numerous reputed logistics solution sources. Thus, we can ensure on time distribution of consignments. Electric Wire Rope Hoist http://www.paryoglifting.in/electric-wire-rope-hoist.htm Mon, 29 May 2017 00:00:00 +0530 We are designers, manufacturers and suppliers of Electric Wire Rope Hoists. Hoists has standard capacity up to 20 ton and customized up to 50 t. All TC certificates are provided for all the material used and the components of the Electric Hoists. Specifications: Class & Duty : I, II, III, IV and Flame Proof. Mechanisms : M1, M2, M3, M4, M5, M6, M7, M8, M9. Design Standards : IS:3177;IS:800;IS:807;IS:3938 Suitable : I-beams, Fabricated I-beam, Sq. Box Section. Capacity : Up to 50 Tons. Lifts : 6 meter standard and up to 150 meters. M.H Speed : 2-3 m/min or custom. C.T Speed : 18-20 m/min or custom. Micro Speed : Using VVVF Drives in steps of 10%; 20% or custom. Brakes : EM disc type fail to safe with or without brake motors. Type of Control : 110 v, AC Power Supply : 415 volts +- 10%, 3 phase, 50 cs ac. Method of Operation : Pendant Push Button Station or Radio Remote Control. Power supply to cross travel motion will be through festooned cable system. Control panel containing all contractor, overloads relays, limit switches, push button station etc. shall be of reputed make like L&T, TCI and BCH. Material Of Construction Wheels : EN 9 Forged rolled steel fitted with anti-friction roller bearing in open reduction. Rope Drum : Fabricated out of rolled steel seamless pipe. Sheaves : Fabricated out of rolled steel. Gear & Pinion : EN-9 & EN-24-Forged low and medium carbon alloy steel. Hook : IS 3815 - Drop forged, Swivel hook- Plain shank type C type or Rampshorn type. Inspection And Testing Reports Radiography test on customer demand. Load testing at our site or at customers place according to mutual understanding. Speed test of HT & CT motions. Testing of electrical components. Warranty Guarantee : All the equipments and components except electrical stands warranted for 12 months against manufacturing defects in the product. Prices 1 T : 55 K 2 T : 70 K 3 T : 95 K 5 T : 1.3 L 7.5 T : 1.8 L 10 T : 2.3 L 15 T : 5.0 Lack Taxes: 5.2% Pack: 3% JIB Cranes http://www.paryoglifting.in/jib-cranes.htm Mon, 29 May 2017 00:00:00 +0530 JIB Cranes are suitably used for workstation jobs and as maintenance cranes. These are mainly utilized in railway, automobile, pharma, tool rooms, machine shop departments to part the work-cycle and loads of E.O.T Cranes. The lifting capacity ranges from 0.5 Ton to 15 Tons. Application sector gives span range from 2-15 meters and lifts up to 10 meters. Depending on the supports and space availability Jib Cranes are categorized as follows: a FLOOR MOUNTED 1. Free Standing Jib Crane 2. Double Boom Jib Crane 3. Mast Jib Crane 4. Free Standing Workstation Jib Crane 5. Free Standing Articulating Jib Crane 6. Portable Jib Crane 7. Foundation less Jib Crane b WALL OR COLUMN MOUNTED 1. Wall Cantilever Jib Crane 2. Wall Bracket Jib Crane 3. Wall Cantilever Work Station Jib Crane 4. Wall Mounted Articulating Jib Crane 5. Ceiling Mounted Articulating Jib Crane 6. Wall Travelling Jib Crane RBS Cranes has wide experience of custom made Jib Cranes, which we can supply in very short time of period and rare economical prices. Deck Leg Gantry Crane http://www.paryoglifting.in/deck-leg-gantry-crane.htm Mon, 29 May 2017 00:00:00 +0530 We are manufacturing, exporting and supplying Deck-Leg Gantry/Goliath Cranes. Deck-Leg Gantry crane is similar to a normal Gantry cranes in spite of height difference in Legs. Specifications Class & Duty : I, II, III, IV with low, medium and heavy duty. Crane Mechanisms : M1,M2,M3,M4,M5,M6,M7,M8,M9. Design Standards : IS:3177;IS:800;IS:807;IS:3938 Girder Construction : I-beam, Fabricated I-beam, Sq. Box, Trapezoidal Span : up to 90 meters Lifts : 100 meters Speed : Speed for all motions can be customized acc. To customer. Micro Speed : Acc. to customers demand may be 3 or more speeds for ht & ct. Brakes : EM disc fail to safe or E.H.T/Disc brakes for all motions of cranes. Type of Control : 110 v, ac Power Supply : 415 volts +- 10%, 3 phase, 50 cs ac. Method of Operation : pendant push button station, radio remote control. Power supply to C.T motion will be through festooned cable system. Control panel containing all contractor overloads relays limit switches push button station etc. Shall be reputed make like L&T/TC/BCH. Material Of Construction Wheels : EN 9 Forged rolled steel fitted with anti-friction roller bearing housed in L-type bearing housing. Rope Drum : Fabricated out of rolled steel seamless pipe. Sheaves : Fabricated out of rolled steel. Gear & Pinion : forged low medium carbon alloy steel. Hook : IS 3815 - Drop Forged, Swivel Plain shank C type or Rampshorn type. Inspection And Testing Reports Radiography test on customer demand. Load testing at our site or at customers place acc. to mutual understanding. Speed test of ht & ct motions. Testing of electrical components. Warranty Guarantee : All the equipments and components except electrical stands warranted for 12 months against errection and commissioning for manufacturing defects in the product and will be replaced against freight Brake Motor http://www.paryoglifting.in/brake-motor.htm Mon, 29 May 2017 00:00:00 +0530 Staffed with a pool of deft professionals, we are capable to deliver high quality lot to the patrons. And, we also make sure that the products are packed using the best quality material. Our range of products is manufactured under the administration of qualified quality control executives by using optimum supplies and ultramodern technologies.   Features Frames - 63 to 200L Rating - 0.18 to 37.0 kW Poles - 2,4,6 & 8 Mountings - B3, B5, B14 & Comb. Protection - IP54 brake torque - upto 250 mm Duty Cycle - S1-S8 Industrial Gearboxes http://www.paryoglifting.in/industrial-gearboxes.htm Mon, 29 May 2017 00:00:00 +0530 Buy excellence in the form of Industrial Gearboxes at coffer-friendly prices, from us! We make sure that our inputs are in conformation with the international quality standards and free from all sorts of impurities in order to offer quality-approved products to the buyers. Compact Shrouded Conductor System http://www.paryoglifting.in/compact-shrouded-conductor-system.htm Mon, 29 May 2017 00:00:00 +0530 Being a client-centric firm, we offer secure payment procedure in both online and offline modes. The procedure is developed by our adroit professionals and approved by the authority. Our organization is renowned among reputed suppliers of premium and superior grade Compact Shrouded Conductor System across the nation.   Technical Data : Conductor Specing : Indoor 30mm min. / Outdoor 40mm min For working temperature exceeding 800 C consult our technical department Note : Tandem collectors are required when expension sections are fitted. Electro Hydraulic Thruster http://www.paryoglifting.in/electro-hydraulic-thruster.htm Mon, 29 May 2017 00:00:00 +0530 Thruster is an electro hydraulic device, designed to exert acontast force to any mechanism to be operated. The Thruster work on a principle of hydraulics. On supply of eectric power, motor driven centrifugal impeller draws the oil from the low pressure end of the chember to the high oressure upper end. The piston mounted on the same shaft moves to the upper end with full thrust, till its movement is stopped by the stopper shoulder at the end of the stroke. Pressure build up stops when power is discontinued. Radialblade design of the impeller enables it to rotate both in clockwise and anticlockwise direction. Therefore power supply to star connection can be in any R-Y-B phase sequence.Special Features : Packaged self contained unit-No external piping and accessories required. Self aligned movement Rated force available for the entire stroke Compatible for use with any exiting or new system. Low power consumption Moving parts being immersed in oil, No frictional losses. Minimum maintenance. Thruster Set 520 :A compact 90 watt, 415 volts, 50 cycles, 3 phase Electric motor is directly mounted on the top of a piston. The piston is housed in the C.I. Tank filled with fluid. The piston moves the fluid from low pressure are to high pressure area. The specially designed impeller which is mounted on the motor shaft produces required fluid pressure.Thruster : ST 535 tost 13300 This range of two thrust rods and a common piston. The motor is mounted on the top cover of the tank. A separator plate divides the tank in two partitions-low pressure side and high pressure side. The spacer bushes control the thruster. The models are suitable for large capacity, Higher motor ratings and larger thruster forces.Maintenance :The thruster is designed for long trouble free service and needs no maintenance. The motor bearings are adequately sized and windings are designed to meet the sudden jerks and shocks. Normal maintenance like topping of the oil levels replacement of damaged worn out oil seal and gaskets is required. The terminal box must be cleaned periodically. Thruster Brakes http://www.paryoglifting.in/thruster-brakes.htm Mon, 29 May 2017 00:00:00 +0530 Thruster Brake is a device to retard the speed and to hold the moving machinary when it is stationary. The braking force to the shoes is applied through the spring by means of lever/ rod mechanism. The shoes are moved clear of the drum again through lever/ arm linkage mechanism by thruster which over comes spring force. "MULTITECH SYSTEMS" Offers a complete range of Electro hydraulic thruster for the total range of thruster brakes. Base/ Arms : Rigid weided construction with accessible fixing Shoes : Self-aligning easily removable high grade cast iron fitted with best quality fabric linings. Large cooling surface drum when brakes are cleared. Tie Rod/ Guide Rod : large Section securely fixed in a lug. The tie rod transmits the spring force on the shoes by a simple lever system. Springs : Compression springs are vertically mounted through the guide rods are are held securely between guide plates. One are more springs are useddepending upon th brake size and thruster capacity to obtain the desired braking torque. Rotary Geared Limit Switches http://www.paryoglifting.in/rotary-geared-limit-switches.htm Mon, 29 May 2017 00:00:00 +0530 Rotary Geared Limit Switch GRLS is used to trip supply when the moving loads reach the extreme and positions of working zone.Operation : A two (for more) contact elements are operated by respective rotating Cams, Suitable adjusted on a Cam shaft which rotates with fixed speed ratio of the drive motor shaft, The Cams can be suitable positioned so that they trip motor supply and stop the motion at the required point of travelApplication :Rotary Geared Limit Switches are suitable for use on reversing drives such as Hoists, Winches, Rolling Mills and various other mechanisms used in steel plants such as Coke Oven, Feeding machinery etc. Worm Drive Limit Switches http://www.paryoglifting.in/worm-drive-limit-switches.htm Mon, 29 May 2017 00:00:00 +0530 Our product is wrapped in industrial grade packaging supplies that are ecological and offer defense to the products against mechanical and transit damage. Furthermore, the product is correctly branded to offer data. Since establishment, our organization has associated with leading traders and dealers. Thus, we serve patrons in Faridabad(India) without any problem.   Application : These limit switches are designed and manufactured according to safety standard and are suitable foruse on reversing drives such as Hoists crane winches rolling mills, Coke oven etc.Design : The driving motion is transmitted by worm gear. All gears and hub are made of low wear thermoplastic. The rotational movements are transmitted to switches by adjustable cams.Driving Cams : Each lever has a single micro matic register srew.Tehnical Data : Body Material - Black GFN Cover Material Yellow - Impact- proof Thermo- Plastic Protection Degree - IP-55 (is;1394-Part-I) Mounting Position - All position mounting Gear ratios - 1:12.5, 1:25, 1:100, 1:200, 1:400 Drive - Worm Screw Cable enteries - Twin 3/4" BS conduct Input Speed - 1200 RPM Maximum Contacts Material -  Double brake, Silver Cadmium Wire connection - Screw terminal contact Rated Voltage - Up to 500 V ac Thermal Test Current - 10 A Dimension'H' For 2 Contact 84 mm 4 Contacts 104mm Counter Weight Operated Limit Switches http://www.paryoglifting.in/counter-weight-operated-limit-switches.htm Mon, 29 May 2017 00:00:00 +0530 Lever (and weight operated) type Limit Switch LLS/CWLS operates the control change-over contacts of motor of an moving equipment when a cam moving with loads actuates the lever of limit switch. This turns the cams on a square shaft and operates the NO I NC contact elements.Operation :Two or more contact elements are operated by respective rotating cams which are suitably fixed on swuare cam shaft turned by a lever or weight. The contacts operate at 140 from central neutral position.Design :The sheet steel bosy, Lever and cover of the limit switch are finished by powder coating treatment. The cam shaft is mounted in the housing on moulded Nylon bushes (bearing) and are fixed through the front & rear walls.Technical Data : Body material - Powder coated sheet Degree of protection - IP - 41 Mounting position - floor mounting Cable enteries - Twin. 3/4' BS conduit No. of contacts - 2 / 3/ or 4 Wire connetion - Silver-cadmimum Rate voltage - 500 Vac Thermal Test Current - 10A Operating Executions :The operating mechanism can be offered in two executions : Roller Operating A alever : These limit switches are used for E.O.T. Cranes wagon shunting devices elevators travel mechanism or such linearly moving mechanisms to prevent over-travel, The poition of operating leveer is in up/ down and can be changes in steps of 900 atsite. Lever Actuated by as dead weight : These limit switches are used to prevent over hoist motion with weight. Counter weight is provided in this case. The same is lifted with wire rope to prevent over hoist position. Master Controller http://www.paryoglifting.in/master-controller.htm Mon, 29 May 2017 00:00:00 +0530 Master controller are used for remote operation of the equipment like E.OT. Cranes & rolling mills drives etc. the enclosure of the controller confirms to I.P. 54 degrees of protection, making it just proof. It hasup to 6 notches either side with maximum 24 contacts as per desired sequence. Controller are provided with spring & Dead man's handle arrangement. They are compact up to 4-0-4 step. Suitable for Hoist-Grab, Cross Travel Long Travel up to 16 contacts per motion with spring return arrangement is provided.Salient Features : Long Life - Millions of operations are possible without significant wear to melamine cams and contacts which are rated for 40 amps, at 500 V.A.C. Simple Maintenance - Maintenance is simplified through the use of indivisual interchangeable contact blocks. Contact tips can be easily inspected without removing the block or dicturbing connetions. When contacts are worm, only fixed and moving contacts can be replaced by removing only one screw. The remaining contact block and circuits are undisturbed. Wide electrical clearance - The design of contact block provides geneous electrical creepage and clearance preventing arcing between contact blocks or to ground. Heavy duty terminal screws are located for convinience and ease of wiring. Technical Data : Body Material - Sheet Steel / Aluminium Die Cast Protection Degree - IP-44 / IP-54 Mounting Position - Confirming to IS - 13947 (Part-1) 1993 Contact material - Horizontal/ vertical Rated Voltage Insulation - Silver Cadmium Thermal Test Current - 500 V A.C. Cable entries - 10 Amps. Frquency of operation - 2X20 Ø 2x26  Ø Standard Conduit Contacts - 1000 Switching per hour No. Of contacts - Single/ double break No. of steps - 24 maximum optional - 7 - 0 - 7 maximum Stainless Steel Grid Resistor http://www.paryoglifting.in/stainless-steel-grid-resistor.htm Mon, 29 May 2017 00:00:00 +0530 Resistors are supplied for both AC & DC requirements. the besic types of resistors are stainless steel wire and punched steel. Suitable for current rating 10 to 800 amps. Multiple paths are used for system hving higher ratings.Stainless Steel Wire Grid Resistors :These resistors consist of stainless steel wires or strimp form of grids. The standard modules with current rating from 7 Amps to 400 Amps Single or multiples options are available.Punched steel Grid Resistors :Punched grid resistors consist of grids punched from sheet of correction resistant nickel chromium alloy sheet steels. The punched steel grids are veryrobus with no effect of jerks, Shocks or vibration. Ideal for heavy operating conditions like steel mill application. Available in current rating 8 Amps to 800 Amps.Technical Data / Features : Enclosed - Sheet Steel duly galvanised/ painted Mounting position - Floor Protection Degree - IP-11/ IP-21/ IP-23/ IP-33 Current rating (s.s. grid) continous - 7-400 Amps Current rating (s.s. grid) continous - 7-800 Amps Cooling - Air/ Oil cooled Teperature rise - 2250C/ 2500C/ 3750C Cable entry - Bottom Radio Remote Controller http://www.paryoglifting.in/radio-remote-controller.htm Mon, 29 May 2017 00:00:00 +0530 With the complete help and support of our team members and management, we conduct strict checking on the quality of raw inputs used for manufacturing. For those seeking to buy superior-grade Radio Remote Controller, we are the best suppliers of it in the market.